Corner of a room seen from below: a white 24mm exposed ceiling grid with lay-in tiles, resting on a wall angle along both walls; two cells are left open, showing the void, the soffit and a hanger wire twisted onto a main runner (illustrative render) — The grid fitted at a corner, with the wall angle along both walls and two cells left open

The four grid parts side by side on a pale surface, seen from their ends: a main runner, a 1200mm and a 600mm cross tee standing on their faces, each a galvanised T-section with holes and end clips, and a white L-section wall angle (illustrative render) — Main runner, 1200mm and 600mm cross tees and the wall angle; all but the 600mm tee run on out of the frame

Ceiling gridExposed suspended ceiling grid

24mm ceiling grid

Main runners, cross tees and the perimeter wall angle for a 24mm exposed grid, in white galvanised or anti-corrosion steel.

Part: Main runner

3600mm; hangs from the soffit on wire; white galvanised or anti-corrosion

Check price and order at FAB Supplies

Prices and orders are on FAB Supplies, the Express Group's online shop.

Request a quote for this product

Face: 24mm exposed
Finish: White or anti-corrosion
Supply: Supply only or supply and install
Lead time: Complex orders about 2 to 3 months

Information

The 24mm exposed grid for our lay-in ceiling tiles: 3600mm main runners that hang from the soffit on wire, 1200 and 600mm cross tees that clip between them to set out the tile modules, and a 3000mm perimeter wall angle that finishes the edge. Every part is galvanised steel, in a white or an anti-corrosion finish.

Four parts, one grid

The 3600mm main runner is the backbone. It hangs from the soffit on wire at regular centres, through pre-punched holes in its web, and has slots for the cross tees.

The 1200mm cross tees clip between the main runners: each one forms the long side of a 600 × 1200mm module, or splits it for the 600mm tees, which close each 600 × 600mm module. The end clips push into the slots without tools, so the grid goes together fast and stays square.

The 3000mm wall angle is an L-section screwed to the wall through its upstand at ceiling height. Its flat leg carries the cut tiles at the edge and hides the junction.

White galvanised or anti-corrosion

Every part is rolled from galvanised steel with a 24mm exposed face. Choose the normal white galvanised finish for dry interiors, or the anti-corrosion finish for pools, kitchens, changing rooms and humid or coastal areas. The finish is chosen on each part's FAB Supplies listing.

For our ceiling tiles

The grid carries 600-module lay-in tiles with a square or tegular edge, such as our stone wool and glass wool tiles in 600 × 600 and 600 × 1200mm.

Acoustic ceiling tiles

And for 3D ceiling tiles

Our 3D fin tile drops into one cell of a 600 × 600 or 1200 × 600mm exposed grid in place of a ceiling tile.

3D ceiling tiles

Specification

From the FAB Supplies listing of each part. Ask us for the details of the grid you need.

Main runner

Length: 3600mm
Face: 24mm exposed
Hanging: From the soffit on wire, through pre-punched holes in the web
Connections: Slots for the cross tees

Cross tees

Lengths: 1200mm and 600mm
Face: 24mm exposed
Connection: End clips that push into the slots of the main runner or the 1200mm tee
Module: 600 × 1200mm with the 1200mm tees; 600 × 600mm with the 600mm tees as well

Perimeter wall angle

Length: 3000mm
Section: L-shaped
Fixing: Screwed to the wall through the upstand, at ceiling height
Use: Carries the cut edge tiles and finishes the grid at the wall

All parts

Material: Galvanised steel
Finish: Normal (white galvanised) or anti-corrosion
Tiles: Square and tegular edge lay-in tiles, 600 module Manufacturer's data

Dimensions

Option	Details	At FAB Supplies
Part
Main runner	3600mm; hangs from the soffit on wire; white galvanised or anti-corrosion	Check price of Main runner at FAB Supplies (opens in a new tab)
Cross tee, 1200mm	Clips between the main runners; white galvanised or anti-corrosion	Check price of Cross tee, 1200mm at FAB Supplies (opens in a new tab)
Cross tee, 600mm	Clips between the 1200mm tees to close the 600 × 600mm module	Check price of Cross tee, 600mm at FAB Supplies (opens in a new tab)
Wall angle	3000mm, L-section; fixed to the wall at the room edge	Check price of Wall angle at FAB Supplies (opens in a new tab)

Data sheet

We hold no data sheet for this product yet. Ask us, and we will send the manufacturer's data we have for the size and finish you are considering.

Ask for the data

Setting out a suspended ceiling?

Send us the reflected ceiling plan or the room sizes. We will work out the runners, tees and wall angle you need, with the tiles.

Get acoustic advice Request samples Request a quote Call 01708 554777

Questions about this product

Which tiles does the grid carry?

600-module lay-in tiles with a square or tegular edge, such as our stone wool and glass wool tiles, and our 3D fin tile, which drops into one cell in place of a tile.

Which finish do I need?

The normal white galvanised finish for dry interiors; the anti-corrosion finish for pools, kitchens, changing rooms and humid or coastal areas.

How does the grid go together?

The main runners hang from the soffit on wire. The 1200mm cross tees clip between them, and the 600mm tees clip between the 1200mm tees to close each 600 × 600mm module. The end clips push into the slots without tools. The wall angle is screwed to the wall and carries the cut tiles at the edge.

Can you work out the quantities?

Yes. Send us the reflected ceiling plan or the room sizes, and we will work out the parts, with the tiles.

Illustrative renders and computer-generated room images, not photographs of our projects.